MAXIMATOR® Dual-Disc Line Filters
MAXIMATOR dual-disc line filters are used to filter process fluids in high pressure systems. This design helps remove the large particles first through a coarse primary disc, which then allows a secondary disc to provide a smaller micron filtration. These filter elements are designed to withstand pressure surges without cracking, flaking, or rupturing. Filter elements come standard in the following micron sizes: 5/8, 8/30, 30/56 (secondary/primary). Filters are rated for temperatures -423˚F to 660˚F*. All line filters come with glands and collars.

MAXIMATOR® Cup-Type Filters
MAXIMATOR cup-type line filters are used when maximum filtration surface area and a single micron size element is preferred. This design increases the filter area as much as 6 times the area of the disc type filter and will permit higher flow rates with a lower pressure drop and longer intervals between element changes. Filter elements come standard in 5, 30, or 56 micron sizes and are easily replaced. Filters are rated for temperatures -423˚F to 660˚F*. All line filters come with glands and collars.

Angle Filters
Maximator US angle filters are used to filter gases or liquids in high pressure systems. The filter elements can be easily changed. The special design allows the exchange of the filter element without the need to first disassemble the filter in front of the tubing. Filter elements are made of sintered material with pore sizes of 5μm, 30 μm or 56 μm. Filters are rated for temperatures -423˚F to 660˚F*. All angle filters come with glands and collars.

Find your product now in our new webshop
You can now access detailed product information and data sheets in our new eStore.